Upgrade your DIY painting setup with the ScotchBlue™ Easy Clean Paint Sprayer.
This paint gun and paint sprayer gun delivers 360-degree paint spray power for grooves and textured surfaces, helping you get a smooth, brush-mark-free finish with water-based paints. Designed as a small, handheld paint sprayer, this portable tool lets you paint in well-ventilated areas where you have access to a power outlet and an air compressor. It is easy to switch colors, and quick to clean — making it a good house paint sprayer option for furniture, cabinets, chairs, bedframes, window frames, dressers, planters, trim, and more.
When you’re done, cleanup takes one minute — just twist and toss the disposable components!
The ScotchBlue™ Easy Clean Paint Sprayer includes 1 Spray Gun, 3 Nozzles, 1 Paint Cup, 3 Paint Cup Liners, 3 Paint Cup Lids, 3 Paint Cup Plugs (for temporary paint storage between coats), 1 Coupler, 1 Air Flow Regulator. A 6-gallon or larger air compressor, air hose, wrench and thread tape are required and not included.
When a new project comes along, upgrade your DIY painting setup with the ScotchBlue™ Easy Clean Paint Sprayer Refill Kit.
The paint sprayer gun and paint gun refill kit delivers consistent paint spray with 360-degree spray power for grooves and textured surfaces, helping you get a smooth, brush-mark-free finish with water-based paints. It is easy to switch colors, and quick to clean — making it a good house paint sprayer option for furniture, cabinets, chairs, bedframes, window frames, dressers, planters, trim, and more in a well-ventilated space. When you’re done, cleanup takes one minute — just twist and toss.
The ScotchBlue™ Easy Clean Paint Sprayer Refill Kit includes 3 Nozzles, 3 Liners, 3 Lids, and 3 Plugs; these disposable components are for use with the ScotchBlue™ Easy Clean Paint Sprayer.
The ScotchBlue™ Easy Clean Paint Sprayer Instruction Manual provides complete product information, setup guidance, operating instructions, safety requirements, maintenance direction, troubleshooting, and cleanup steps for using the ScotchBlue™ Easy Clean Paint Sprayer.
The ScotchBlue™ Easy Clean Paint Sprayer Quick Setup Guide provides a simplified, easy-to-follow overview of the key steps needed to prepare the ScotchBlue™ Easy Clean Paint Sprayer for use. Refer to the instruction manual for safety warnings before use.
Limited Warranty, Remedy and Disclaimer:
This product will be free from defects in material and manufacture for a period of one (1) year from the date of purchase. User is responsible for determining whether the product is fit for a particular purpose and suitable for user’s application. Use in professional applications is not covered under this warranty. If this 3M product is proven defective within the warranty period, your exclusive remedy and 3M’s sole obligation shall be, at 3M’s option, to replace the 3M product or refund of the purchase price. This warranty does not cover normal wear and tear, or damage resulting from accident, misuse, alteration, improper maintenance, inadequate cleaning, or lack of reasonable care. 3M MAKES NO OTHER WARRANTIES OR CONDITIONS, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OR CONDITION OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE.
This warranty gives you specific legal rights, and you may have other rights which may vary from state to state, country to country. To obtain warranty service, contact 3M at 1-800-494-3552.
This warranty gives you specific legal rights, and you may have other rights which may vary from state to state, country to country. To obtain warranty service, contact 3M at 1-800-494-3552
Limitation of Liability:
Except where prohibited by law, 3M will not be liable for any loss or damage arising from the use of this 3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory asserted, including warranty, contract, negligence, or strict liability. Some states and countries do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you.
The operating pressure range for this sprayer is 30-50 PSI. It is recommended to test spray on scrap material before starting your project to adjust PSI based on paint thickness and desired spray performance.
Yes. This paint sprayer requires airflow that is at least 5.35 SCFM at 30 PSI. Always check your air compressor specifications to confirm that it can supply both the minimum SCFM and PSI required. Actual output may vary based on compressor design, condition, air hose length and diameter, and setup.
Move or cover any nearby items you want to keep free of paint. Some overspray can occur.
It is not recommended to reuse the disposable parts. However, used paint cup liner, lid, and nozzle may be immediately and thoroughly cleaned with water for reuse. The nozzle and paint cup lid may be especially difficult to clean and may not be suitable for reuse. Note that cleaning disposable parts for reuse may take longer than 1 minute.
The sprayer is suitable for painting a variety of common surfaces around your house. For best results, always test on a small area first and follow the paint manufacturer’s recommendations for paint compatibility and surface preparation.
This sprayer must be used in a well-ventilated area only. Always wear appropriate personal protective equipment for eye, skin and respiratory protection per the paint manufacturer’s guidelines at all times when spraying.
If the paint is not spraying evenly or flow seems restricted, additional thinning with water may be needed. Follow product instructions and test spray before starting your project.
Stop spraying and replace the lid and nozzle according to the troubleshooting instructions before continuing.
Dispose of the used liner, lid, and nozzle. Keep the paint cup and spray gun. Follow the product instructions for proper cleaning steps.
Hold the sprayer 6-8 inches from surface.
Use smooth, even passes and overlap roughly 50% with the previous pass for consistent paint application. Testing your spray pattern first can help improve results.
Drips and runs can happen when too much paint is applied in one area or when the sprayer is held too close to the surface.
This may be caused by incorrect paint consistency or PSI, spraying too far from the surface, buildup on the nozzle, or inconsistent spraying speed. Refer to the troubleshooting section in the instruction manual provided with the product.
Yes. Test spraying on scrap material or in an inconspicuous area is recommended before beginning the main project.
Yes. Always wear appropriate personal protective equipment for eye, skin and respiratory protection per the paint manufacturer’s guidelines at all times when spraying.
Yes, additional parts are available for purchase in the Scotch Blue Easy Clean Paint Sprayer Refill Kit (CAT# CR-K-2C)
Some spray gun setup is required before first use. For setup guidance, refer to the instruction manual included with the product.
Yes, all 3 nozzles included are interchangeable.
Refer to the troubleshooting section in the instruction manual, product support materials, and the how to videos for troubleshooting steps and guidance.